MINISTRY OF PUBLIC ORDER CERTIFIED
MINISTRY OF DEFENSE CERTIFIED
ICoC SIGNATORY COMPANY
NATO CERTIFIED (NCAGE CODE G2181)
UNGM REGISTER COMPANY (400640)
E3500 PORTABLE EXPLOSIVES TRACE DETECTOR

The E3500 is the world’s first and most recognized portable explosives trace detector that uses Luminol hemiluminescence (Chemilumina).
The E-3500 is the only portable device capable  of detecting the presence of all threat explosives, including ICAO taggants,military plastics and TATP.
Unlike other detectors, it does not use any external carrier gas or radioactive source.
If portability, quick detection and clear, accurate results are crucial, then this is the explosives detector needed.
The E-3500 offers extremely fast and stable detection with very high selectivity for explosives and immunity to humidity or contamination problems.
The E-3500 detects traces of particulates and vapours, allowing for non-invasive searches of luggage, mail, vehicles, documents and containers.
The E-3500 is flexible and easy to operate, offering both vapour and particulate sampling without the use of an external carrier gas or radioactive source.
Vapours are sampled directly via the sampling nozzle.
Particulates are sampled by swiping a suspected object with a cotton glove or other means and transferring any traces to the unit.
This dual capability enables users to select the most suitable method of sampling for the explosives of interest.
The E-3500 is ready for operation within thirty seconds from turn on, and starts processing samples immediately, giving results in just seconds.
The E-3500 has proven to be capable of detecting plastic and high vapor pressure explosives rapidly-giving clear results you can trust.
Luminol Chemiluminescence is an ASTM-EPA standard method for atmospheric monitoring of nitrogen dioxide.
It can detect minute traces (low nanogram level) of C-4, TNT,Dynamite, PETN, Semtex, EGDN, DMNB, RDX, ANFO, Amonium,Nitrate, Urea Nitrate, Nitrogly-cerine and TATP, with low false alarm levels and few interferents.

SPECIFICATIONS:

Detection Principle: Luminol Chemiluminescence - Disposable cartridge
Radioactivity: No radioactive source, and no licensing or radioactive calibration applicable.
Detectable Compounds: Most military (including plastic) and commercially available explosives,C4,TNT, Nitroglycerin Dynamite, PETM, Semtex, RDX, ANFO, ICAO Taggants, (DMNB, EGDN, o-MNT, p-MNT), Urea nitrate, and TATP
Sampling Capabilities: Vapors and particulates - Dual mode
Typical Sample: 5-30 seconds (user selectable based on application)
Analysis Time Sample: Within 15 seconds
Initial Warm-Up Time: 30 seconds
Carrier Gas: None required (ambient air)
Controls: Power switch, keypad, automatic vapor/particulate selector and volume control (with optional earphone)
Data Storage & Communications: 1000 retrievable data records RS-232 serial output port for remote control and monitoring
Power Supply: 12 volt DC rechargeable battery pack, external battery pack, 12 volt AC adapter
Operating Temperatures: 0°C to +55°C (+32°F to +131°F)
Storage Temperatures: 0°C to +65°C (+32°F to +149°F)
Shipping Weight: 12 kg (26 lbs.) in steel-reinforced, foam-padded, protective carrying case

NATO STOCK NO (NSN): 6665-99-981-0379
We only legal trade with countries/companies that are not under any sanction by the UN and the EU
Copyright 2008 - International Armour, All rights reserved
NR-900EK3M ‘EAGLE’ Non-linear junction detector

One of the important technical preventive measures against terrorism is the non-linear and metal detectors aimed at detection of semiconductor and iron parts of IEDs used by terrorists.

NR-900EK3M (EAGLE)
designed for Detection of mines and explosive device with electronic fuses (activation system) concealed on the ground surface, slightly in the ground (snow), under the road pavement and within various facilities.

DETECTS:

• communicational transmitters & receivers as well as alarm and remote control system facilities;
• electronic and electromechanical timers;
• acoustic, magnetic, optoelectronic sensors and midget TV cameras;
• built-in metal-ware  as well as hidden machinery and appliances;
• domestic electronic units and alpine skiing in snow traps.

APPLICATION:

• roads, terrain and objects inspection for mines, improvised explosive devices (IED) and other explosive
  appliances with electronic components
• searching for hidden caches with weapons, ammunition, explosive devices & communication facilities
• questioned items investigation, searching  for subversive and terrorist devices and arrangements

ADVANTAGES:

- extended detection range
- electronic facilities localization in any operational mode active, stand-by or
even  switched off installed behind walls, fences etc.
- equipment design allows its usage in tactical airborne missions
- efficient use in search/reconnaissance missions
- high searching rate
- safe to handle, user-friendly design
- extended continuous operational time without
battery replacement
- long-term operation facility in field conditions
EOD PRODUCTS AND SERVICES

Land Mines and explosive ordnance contamination is the result of WW I - WW II and numerous worldwide conflicts during the past 100 years. Today, the United Nations estimates that more than 70 countries are facing a significant landmine and/or explosive ordnance contamination problem, while a smaller number experience the problem to a lesser degree.

RISK Group is constitute by high educated certified and with many years of experience staff in EOD and bomb disposal services.  Our EOD head quarter is located in Europe, with offices, branches and co-operators almost worldwide and with main aim the reducing and elimination of the RISK posed by the contamination caused by unexploded ordnance and land mines as well as the alleviation of the impact that the contamination causes to infrastructure for future development, people's lives socially, economically and environmental.

We provide a comprehensive range of EOD/Mine Action products and projects worldwide including Explosive Ordnance Disposal, Landmine Clearance, Site Investigation, Marine Services, QA/QC, Risk Assessment, EOD Training and equipment provision consultant.

Our clientele includes governments, specialist units of the MoD, oil companies, construction industries and local and international organizations and companies while our officers have an extensive experience in land and marine surveys, investigation, consultancy, landmine clearance training and clearance of land contaminated areas with ordnance including bombs and landmine, both on land and underwater.
MK5A EOD Bomb Disposal Suit

The state-of-the-art MK5A EOD Bomb Disposal Suit is an up-armoured version of the MK5 Bomb Disposal
Suit which has been in use for many years in dozens of countries worldwide.
The MK5A provides the highest level of protection of any bomb suit currently manufactured, whilst at the
same time offering maximum comfort and flexibility to the operator.
It can be supplied in any size required by the client.

EOD Search Suit

The Search Suit has been designed specifically for personnel involved
in searching for and clearing of  mines and terrorist explosive devices. 
Although the Search Suit does not offer the higher protection of the MK5
EOD Bomb Disposal Suit, it is much lighter in weight, provides all-round
protection, whilst at the same time being comfortable to wear and allowing virtually unrestricted movement.

Hard-Wired Communication System

The Hard-Wired Communications System is a fully duplex communication system designed specifically for EOD teams using the MK5 EOD Bomb Disposal Suit.
The system provides duplex communication between the bomb disposal operator and his back-up team.  It consists of a plug which connects to the helmetΥs in-built earpiece and microphone, 100 metres of twisted core signal cable mounted on a spool, a headset, speaker/amplifier, and carrying bag
.

De-Mining Apron & Visor

The De-Mining Apron was designed specially for UN de-mining operators. It is provided with a head-mounted flip-up ballistic visor which provides protection against shrapnel and anti-personnel mines.

Mine Shoes & Gaitors

The Mine Shoes are a tried and tested product that have been developed following many years of research and countless hours of field and laboratory testing.
The shoes can be inflated and attached to the operator’s foot in seconds using a velcro and aluminum harness.
Once secured, the shoes can be used to traverse anti-personnel minefields allowing the wearer to walk directly over mines
without fear of detonation.
A conventional de-mining boot only offers a degree of protection should a detonation occur.
The concept, though unique, is extremely simple and works by evenly distributing the user’s weight over a wide area, in a
uniform manner, meaning that the actual pressure exerted on the mine will be less than the operational threshold required
to detonate the mine.
The Mine Shoes are currently being used by UK EOD Teams in Iraq and Afghanistan and are in service with other armies
worldwide.

Length: 70cm
Width: 37cm
Weight: 2.8kg
Protective
Safeway Bomb Containment Trailer (NSN: 1385-99-331-1632)

The Safeway Bomb Containment Trailer System was developed by government Explosive Ordnance Disposal (EOD) experts to enable relatively inexperienced operators to remove a suspect Improvised Explosive Device (IED) to a safe location where it can safely be examined or destroyed.
The equipment is designed to safely contain and transport a suspect  explosive object of up to 4Kg of TNT and up to 600mm x 800mm x 600mm in size.
The unique design of the Safeway enables it to be easily used with a minimal amount of training.
The Safeway Bomb Containment Trailer System consists of a specially designed bomb container mounted on a four wheeled trailer which can easily be towed.
The container is made from two layers of high-strength, high-impact 40mm ballistic steel.
The chamber space between the inner steel ‘tube’ and the outer steel wall is filled with dry sand* which together with the strengthened ballistic steel, helps absorb the effects of blast, thus enabling the Safeway container to be used repeatedly.
The Safeway’s exceptional thermal and pressure-tolerant design provides high explosion suppression capability. In the event of an accidental detonation the tubular design of the container ensures the blast effect will be directed vertically upwards, rather than sideways, thus ensuring minimal damage will be caused to the towing vehicle, trailer body and the surrounding area.
A suspect device is picked up with the aid of a hand-portable telescopic manipulator which can be provided with the Safeway System.
The operator places the device on the back of the Safeway trailer and the rotating pneumatic lifting arm is
remotely operated to raise the package and gently place it inside the container.
Once the Safeway is loaded with the suspect device the trailer can be safely towed to a convenient site where the device can be removed from the container.
Shock absorbers help protect the container from any sudden movement. Removing the suspect device is done by reversing the loading process.
Once removed from the Safeway container, the device can be examined with the use of a portable x-ray or it can be harmlessly disposed of with the use of an explosive disruptor.

SPECIFICATIONS

Trailer size: 4.1m long x 2.2m wide x 2.2m high
Outer Container size: 1.8m high x 1.7m wide
Height to top of vessel: 1.6m
Steel Thickness: 40mm
Overall Weight: 3000kg (3.5 tonnes when filled by user with dry sand)
Protective Level: 4kg of TNT

TABRE shield 1000 Explosive Isolation Unit

The TABRE shield 1000 Explosive Isolation Unit has been designed for the safe containment of postal bombs, explosives and IED devices and has been developed in consultation with UK Government EOD and IEDD experts.
The units are designed to accommodate a wide variety of packages and parcels, including calendars and drawing tubes.
The TABRE shield Isolation Units are simple-to-use, intrinsically vented steel boxes lined with the unique TABRE¨ blast attenuation materials.
Each unit has a fail-safe, three-catch, positive closing system allowing one to immediately identify whether the TABRE shield is closed correctly.
The units are small enough to fit under most work surfaces, thus allowing them to be discretely hidden away.

Shrike Exploder

The Shrike Exploder (complete with charger) is a fully approved hard wire exploder which is currently in service in more than 44 countries worldwide.
From the arctic to the tropics it has proved itself as a safe, reliable and cost-effective system for the initiation of explosives, mines, pyrotechnics and other electro-explosive devices (EED).
Bomb Disposal
MINE SHOES
NR-2000 Non-linear junction detector

Applications

1. Engineer reconnaissance in urban environment in order to prevent a terrorist  attack. Forensic investigation of the area where a terrorist act has been committed.

2. Detects explosive devices containing electronic components  which may be located in structures, in the stands, in rooms interior.

3.For use in a survey of objects during counter intelligence special operations

Main Tasks / Detects

1. Self-made explosive devices with electronic fuses regardless of their operational mode (switched-on or turned off)

2.Fragments and splinters of self-made explosive devices (IEDs) with electronic fuses remained after the actual explosion.

3.Hidden eavesdropping devises.

4.Mobile phones (even in OFF mode and with dead battery)

5.SIM cards (located separately) in the areas where mobile phones are strictly prohibited
The HEDD®1 DETECTOR

HEDD 1 detector is the solution for which many security operators have been looking for


HEDD1 is setting new standards in handheld explosive and weapon detection based on Direct Distant Detection/ DDD/ method for detection and exploration of deposits of materials and on its unique patented Magneto-Electrostatic Detection (MED) method.

HEDD1 forms a modulated magnetic field that allows detection of all types of commercial and military explosives including liquid explosives, weapons and ammunitions within a distance between 2-100 meters behind and through all types of barriers (including concrete, steel etc.)

- Ready for use without any warm-up time, maintenance-free
- Intuitive to use
- HEDD1 classifies large areas quickly
- Handheld device, easy to operate, 24/7
- Saving time and manpower resources due to fast and efficient usage
- Covert detection possible
Detectors
Search Kits
Visual Search Inspection Kit

The new Visual Search Inspection Kit is a new inspection kit which replaces the original Search Kit.
It is designed for use by professional EOD, Customs & Police Search operators for detecting possible explosive devices (IED's), contraband and crime evidence.

Bomb Search Kit

The Bomb Search Kit is an inexpensive kit designed for IED search operation.
It contains a portable endoscope/boroscope, portable hand lamp, portable drill, as well as an assortment of tools.
When immediate visual inspection behind walls and panelling is required, the portable drill set enables inspection holes to be drlled through all types of material, allowing rapid internal inspection.
The kit provides a range of tools for removing panelling and inspection covers and is suitable for carrying out general searches in vehicles and ships.

Alpha Building & Vehicle Entry Kit

The ALPHA 2 Building and Vehicle Entry Kit contains a selection of Hook and Line based tools designed to remotely open vehicle and building doors, operate locks and shatter vehicle windows.
Designed to be compatible with all Hook and Line kits, the system can also be supplied with an optional roll of Kevlar rope for independent use.

IEDD Operators Tool Kit

The IED Operator’s tool kit has been developed by highly experienced EOD operators for use by bomb disposal technicians.
The kit contains a wide variety of hand tools and accessories for use in all phases of EOD operations.

STK2 Search Tool Kit

The STK2 is a new tool kit which is designed to assist during search operations conducted by bomb search teams and also Customs operators.
It contains a comprehensive range of handtools to enable operators to dismantle equipment and machinery, as well as a range of cutters and saws to open gates and penetrate fences.

36-Piece Non-Magnetic Tool Kit

The 36 Piece Non-Magnetic Tool Kit is designed for EOD operations manufactured from beryllium copper alloy and conform to Stanag 2897 standards.

1 x TWEEZERS - 200mm (BeCu Material)
1 x PROBE 200 187mm (BeCu Material)
1 x KNIFE 185 (BeCu Material)
1 x 255MM SCISSORS 225 (BeCu Material)
1 x HACKSAW 500 (BeCu Material)
1 x HACKSAW BLADE 300mm (BeCu Material)
1 x PUTTY KNIFE/SCRAPER 40x200 (BeCu Material)
1 x WIRE BRUSH 4 row (BeCu Material)
1 x SCREWDRIVER OFFSET FLAT 3x50 (BeCu Material)
1 x SCREWDRIVER OFFSET FLAT 4.5x150 (BeCu Material)
1 x SCREWDRIVER OFFSET FLAT 6x100 (BeCu Material)
1 x SCREWDRIVER OFFSET FLAT 8x150 (BeCu Material)
1 x SCREWDRIVER OFFSET FLAT 10x300 (BeCu Material)
1 x SCREWDRIVER OFFSET 6X150MM 6x150mm (BeCu Material)
1 x SCREWDRIVER OFFSET 6X130MM 6x130mm (BeCu Material)
1 x SCREWDRIVER OFFSET 10X140MM 10x140mm (BeCu Material)
1 x SCREWDRIVER CROSS HEAD NO.1 No.1 (BeCu Material)
1 x SCREWDRIVER CROSS HEAD NO.2 No.2 (BeCu Material)
1 x SCREWDRIVER CROSS HEAD NO.3 No.3 (BeCu Material)
1 x SCREWDRIVER CROSS HEAD NO.4 No.4 (BeCu Material)
1 x PLIERS COMBINATION 200 (BeCu Material)
1 x PLIERS FLAT NOSE 150 (BeCu Material)
1 x PLIERS SNIPE 155MM 150 (BeCu Material)
1 x SIDE CUTTERS 165MM 150 (BeCu Material)
1 x WIRE SNIPERS 150MM 150 (BeCu Material)
1 x PLIERS ROUND NOSE 150MM 150 (BeCu Material)
1 x PLIERS 200MM 200 (BeCu Material)
1 x ADJUSTABLE SPANNER 19X150MM 150 (BeCu Material)
1 x ADJUSTABLE SPANNER 28X255MM 255 (BeCu Material)
1 x ADJUSTABLE PIPE WRENCH 28X355MM 355 (BeCu Material)
1 x BALLPEIN HAMMER WITH GRP SHAFT 680G (BeCu Material)
1 x CLUB HAMMER WITH GRP SHAFT 1.8KG (BeCu Material)
1 x COLD CHISEL 16 X 165MM 16x160 (BeCu Material)
1 x COLD CHISEL 16 X 165MM 16x160 (BeCu Material)
1 x PRY BAR 16 X 455MM 16x455 (BeCu Material)
1 x SWAN NECK BAR 455MM 455
1 x Tools bag

Miniature Inspection Kit

The Miniature Inspection Kit is a highly cost-effective search kit designed for EOD operations,as well as for scenes of crime search.
The Miniature Inspection Kit enables the internal search of suspect cases and containers through small apertures with the minimum of disturbance. Included in the kit is a battery handle and a range of light probes with diameters from 3mm and mirror sleeves with diameters as small as 9.5mm.
Light probes can be assembled up to 760mm in length.

Special Search Camera Kit

The Special Search Camera Kit, or Telescopic Colour Zoom Camera System as it is also called, is a portable, lightweight system designed to provide crisp, high quality full colour images for EOD/IEDD search, as well as SWAT and fugitive surveillance operations.
It is ideal for searching shipping containers, ships' holds, cabins, vehicles and any dark, inaccessible locations.
The Special Search Camera Kit consists of a 5 section telescopic pole, which extends from 390mm to 1470mm, with a flexible joint fitted with a watertight colour camera head 60mm diameter x 107mm long which is attached to a 2.5 metre camera cable. Ultra bright light illumination is provided by an LED ring light array in two mixed, switchable banks.

Endoscope Search Kit

The portable Endoscope Search Kit has been designed as a competitvely priced search kit for use in buildings, cars and vessels.

Viziscope Fibrescope with Infra-Red Lighting System

The Viziscope is a widely used fibrescope with a 600mm working length and a finely tapered, 1.6mm diameter pin-hole tip.
This tip provides an outstandingly bright image with a seemingly endless depth of image sharpness. The equipment is supplied as a complete kit, complete with a high-resolution monochrome CCD camera, hands-free monitor, as well as an infra-red illumination board and carrying case.
The Viziscope Fibrescope uses an infra-red light source and the portable mini-monitor, which is supplied with a waist and neck strap for hands-free use, the Viziscope Fibrescope can ΤseeΥ up to 4 metres in areas of complete darkness.
This makes the equipment ideal for covert surveillance and search tasks, such as looking under a door to examine the contents of a room or container, looking inside cavities and voids etc.
Viewing is 0Ό directly forward, with a wide angle 70Ό field of view.

Infra-Red Telescopic Camera System

The Infrared Telescopic Camera System is a portable search kit ideal for use by police, customs and special forces for searches of buildings, ships, aircraft and vehicles for firearms, explosive devices, contraband and criminal suspects.
The Infrared Telescopic Camera System is highly versatile, comprising a high-resolution monochrome camera integrated with a powerful infrared illumination system mounted on a telescopic pole which enables the operator to 'see' in small, confined areas of total darkness.

Low Cost High Resolution Fibrescope

This well-priced High Resolution Fibrescope is an ideal solution for inspection, condition- monitoring, investigation and security applications where normal viewing access is difficult.
The High Resolution Fibrescope, which has a focussing eyepiece, has a 6mm diameter and 1.5m long shaft with 4-way remote tip with 90Ό up/down and left/right articulation provided using single-hand operation lever controls. It has 0Ό forward viewing with a 60Ό field of view.
A high resolution glass fibre image bundle ensures excellent image quality.

Telescopic Pole Camera System

The Telescopic Pole Camera Inspection System is a completely portable and modular inspection system with a built-in miniature microphone.
The equipment comprises a 6mm diameter colour camera, with built-in infra-red illumination, which is mounted on a telescopic pole.
The camera automatically changes to black and white in low light conditions and is also waterproofed for under-water inspections.

EOD Tripod

The EOD Tripod has been designed to enable a bomb disposal operator to remotely lift a suspect improvised explosive device (IED) weighing up to 100 kg from recesses such as a car boot, drainage hole etc.
The 3 section telescopic legs of the EOD Tripod can be adjusted to the appropriate height, allowing for flat or sloping ground, and then locked into position.
The flat, self-levelling, foot of each leg can be protected from movement on a hard surfaceby use of sandbags or, on soft ground, be pegged into the ground with the pegs provided
Visual Search
Illuminated Telescopic Inspection Mirror

This mirror is probably the most widely used search mirror for people to search under their vehicles for possible car bombs.

Rigid Search Endoscope Kit

The competitively priced Rigid Endoscope Search Kit has been developed for use by specialist Police, Customs and military
operators for a wide range of applications, including narcotics and contraband detection, IEDD and EOD.
The Rigid Endoscope's very high quality optics tube is made of extremely rugged stainless steel.
It has a diameter of 12mm and a working length of 300mm, with a 90΅ lateral direction of view and a 30΅ field of view.
The focus is fully adjustable from 10mm to infinity, and the integral high power fibre optic lighting provides bright and safe 'cold light' illumination, so there is no hot lamp at the end of the Endoscope's tip.

Interscope Search Endoscope

The Interscope is a portable endoscope for searching inaccessible areas of buildings, ships and vehicles.
The robust fixed focus endoscope can be used to inspect cavities and hollow structures internally through holes and gaps of 12mm diameter, with illumination provided by a bright 10 watt lamp protected within the tip.
The endoscope is supplied with a lightweight battery pack, which provides 1.1/2 hours' plus continuous use when fully charged, and a charger power unit.
The Interscope allows the rapid internal inspection of cavities through a hole of only 12mm diameter.
The powerful lamp protected within the tip of the Interscope provides bright illumination for searching dark areas.

Flexible Colour Video Endoscope

The top-quality Flexible Colour Video Endoscope issupplied asa complete, fully portable system specially designed for search professionals to use in areas that are difficult to access, such as inside fuel tanks and behind concealed panels.

Viziscope Fibrescope Kit

The Viziscope is a flexible endoscope designed for covert search and surveillance applications where only a tiny viewing aperture,such as a key hole, under a door,or even a pin hole, may be available.   
Having an image bundle with 30,000 pixels, each of only 8 micron diameter, the Viziscope gives outstanding image resolution and exceptional light response, making it suitable for use in low light conditions. 
An operator simply inserts the 4mm diameter  tip of the 720mm  long flexible endoscope through a suitable aperture. 
The eyepiece has a diopter focus adjustment or, for long-term applications, one can simply  attach it to a CCTV camera via the "C" mount adaptor provided.
The fully flexible Viziscope has a tough polyurethane protective oversheathing.

Under Door Viewer

The latest Under Door Viewer has been designed to obtain live video and audio from within a confined space by means on a 4mm high insertion blade which contains a high resolution camera and highly sensitive microphone incorporated into the tip of the blade.
Comprising the latest optical array, the video image is taken from the very forefront of the blade via a 2.10mm diameter tube to a high resolution monochrome TFT screen.
At the same time the highly sensitive and operationally proven Knowles FG series microphone provides a clear and distinct audio signal of the interior.
This high quality system provides the very best solution to a commander preparing a risk assessment for this dangerous area of operations.

Non-Conductive Flexible Endoscope Kit

This top-of-the-line Non-Conductive Flexible Endoscope is designed for search applications, such as the examination of fuel tanks, where it is essential that the shaft ofthe endoscope is completely non-metallic and non-sparking.
Mk1 Hook & Line Kit

The MK1 is a basic hook and line kit recommended for clearing explosive ordnance.  The kit was developed in conjunction with British Army bomb disposal teams to provide a versatile means of remotely moving dangerous objects in a wide variety of locations.
The varied components enable a line to be securely fastened to all types of munitions and IED's to facilitate their movement to improve access for many types of disposal operation.  Alternatively the MK1 kit is often used as a means of 'tumbling' suspect objects when carrying out high-risk searches of hides or 'safe houses' which may be 'booby' trapped. 

Mk2 Hook & Line Kit

An enhanced Hook and Line set that has been refined and updated to a new UK Ministry of Defence specification. The MK2 has been extended to include a range of new components for dealing with the wide variety of improvised explosive devices now encountered.
The comprehensive set includes two 120 m lines to provide action at a distance, devices for attaching the line to all types of object, and components for changing the direction of the line to give lift, avoid obstacles or gain safe cover.

Mk3 Hook & Line Kit

A heavy duty hook and line kit approved by the UK Ministry of Defence for moving vehicles and heavy improvised explosive devices. The HAL MK3 has been designed for use where the load limitations of the HAL MK1 and the HAL MK2 are likely to be exceeded.
Components in the HAL MK3, which includes slings, hooks and shackles, enables the 150 metre line to be attached to a suspect vehicle or container quickly and securely with the minimum of disturbance. Snatch blocks allow the operator to change the direction of the line to gain protection or to operate in confined areas. Ground anchors enable the snatch blocks to be used where there are no natural anchorage points.

Mk4 Hook & Line Kit (NSN 1385-99-665-5985)

The MK4 kit provides a variety of components for attaching a line to a suspected IED and devices for anchoring snatch blocks to floors, walls and windows and door frames. Snatch blocks are self opening to enable IED's to be manoeuvred along complex routes in a single operation.
The 120m line enables the removal operation to be conducted remotely.
A sledge is included which can be used to improve the maneuverability of a suspect object on stairs or rough ground and to prevent snagging at corners. A telescopic pole which extends to 3m may be used to attach a hook and line remotely.

Bergen Mounted Hook & Line Kit

The Backpack- Mounted Hook and Line Kit has been designed to negate the need for an assortment of hook and line kits.
It brings together much of the functionality of the entire Hook & Line Kit range into one easy-to-deploy backpack.
The Backpack-Mounted Hook and Line Kit comes with a detachable smaller bergen, which is ideal to take forward for subsequent, smaller, specified tasks.
The kit has been designed in co-operation with British army experts.
It includes 100 metres of high strength Kevlar rope, a range of hooks, anchoring devices and attachment tools, including the advanced automatic pulley opening system.
This system allows suspect devices to be maneuvered along complex routes without the operator having to return to the hazardous area. The kit also includes a selection of search mirrors and telescopic arms
Hook & Line 2
Hook & Line 4
Contents

100M long 5.5mm dia line with snap hook 
Hook, small single plain
Hook, medium single plain
Hook, medium double plain x 2
Hook, large single plain
25mm eye x 4
Rope sling, 3mm dia x 2m long x 2
Rope sling, 4mm dia x 2m long x 2
Rope sling, 5mm dia x 2m long x 2
Shock cord, 10mm dia x 2m long, soft eye x 2
Shock cord, 10mm dia x 1m long, soft eye x 2
Piton spearpoint 55mm long x 2
Piton spearpoint 80mm long x 2
Piton chisel 55mm long x 2
Piton chisel 85mm long x 2
Self grip forceps x 2
10 Self grip pliers with eye x 2
Karabiner (alloy) 18mm screwgate 27kN x 4
Door stop plastic wedge x 4
Tools compact set pocket knife x 1
Pulling handle x 1
Rope eye

1.5m 4 sec telescopic pole
Hook spring gate 15mm
Hook spring gate 50mm
Light-weight spring grip x 2
Belt sling
Large IED net
Automatic opening snatch block x 4
Torpedo release
Sticky eye x 10
Rope 3mm dia x 100m 3 strand polyester
1.6mm dia x 5m long stainless wire x 5
Clear cable tie 368 x 7.6 x 100
Red cable tie 200 x 4.8 x 100
Duck tape 50mm x 50m
Safe-C security mirror
High intensity pocket torch
Telescopic inspection mirror with 140mm convex mirror
Comprehensive Hook & Line Kit

The Comprehensive Hook & Line Kit provides a bomb technician with a wide range of equipment that can be deployed to gain access and remove, manipulate and handle suspect explosive devices contained inside buildings, vehicles, as well as in open areas.

Included in the Comprehensive Hook & Line Kit is a wide range of tools and equipment designed specially for a bomb disposal professional to successfully dispose of hazardous devices. The portable Comprehensive Hook & Line Kit is supplied in case with a foam insert and contains components for attaching line, anchoring pulleys and manoeuvring dangerous objects to a safe position.

The components of the Comprehensive Hook & Line Kit were developed in conjunction with British Army bomb disposal experts, as Hook and Line rigging equipment is recognised worldwide as an integral component of any
EOD teams inventory.


Contents

1x Safe-C Security Mirror
2 X Snatch Block
1x Hook, Small Single Plain
1x Hook, Medium Single Plain
2 X Hook, Medium Double Plain
1 X Hook Large Single Plain
2 X 25mm Eye
1x Reel, White Kevlar Fitted With Snap Hook
1x Reel, Black Kevlar Fitted With Snap Hook
1 X Rope Sling, 3mm Dia X 2m Long, Soft Eye
1 X Rope Sling, 4mm Dia X 2m Long, Soft Eye
1 X Rope Sling, 5mm Dia X 2m Long, Soft Eye
1 X Wire Sling, 1.5mm Dia X 2m Long, 30mm
1 X Wire Sling, 2.0mm Dia X 2m Long, 30mm
1 X Wire Sling, 3.0mm Dia X 2m Long, 30mm
2 X Triple Barb Hook With Mount For Telescopic Pole
1 X Piton Spearpoint 55mm Long
1 X Piton Spearpoint 80mm Long
1 X Piton Chisel 55mm Long
1 X Piton Chisel 85mm Long
1 X Double Suction Pad With Anchor Poin
t
Hook spring gate 50mm
Light-weight spring grip x 2
Light-weight spring grip x 2
Belt sling
Large IED net
Automatic opening snatch block x 4
Torpedo release
Sticky eye x 10
Rope 3mm dia x 100m 3 strand polyester
1.6mm dia x 5m long stainless wire x 5
Clear cable tie 368 x 7.6 x 100
Red cable tie 200 x 4.8 x 100
Duck tape 50mm x 50m
Safe-C security mirror
High intensity pocket torch
Telescopic inspection mirror with 140mm convex mirror
Scantrak Portable Digital X-Ray System

- Real time examination of suspect articles
- Zoom, reverse black and white, pseudo colourand 3D
- Software-controlled by laptop computer provided
- Fully digital system
- Excellent resolution / Fully portable 
- No additional costs for X-ray films and development
- Measuring program
- Remote control option


Scantrak is a multiple application, fully portable digital x-ray viewing system designed to enable police, military, EOD, customs, law enforcement agencies,prisons and building security managers to examine and store high resolution x-ray images of suspect articles. The Scantrak system can be set up in minutes by one person and is provided complete with the XR200 x-ray generator unless otherwise specified.
It allows the remote detection and investigation of suspect articles in a wide range of applications, including: bomb detection and disposal, drugs and contraband search, suspect package investigation, searching behind walls and panels. Scantrak has both ROV and wireless capability.
Scantrak s powerful image enhancement software allows fast evaluation and identification of hard-to-detect objects and the ability to store over 32,000 images on hard disk or CD. Raw and stored images can be exported by email or across a network via a built-in modem. Scantrak s Image Processing Features include: zoom, inverse image, B/W, pseudo color, pseudo 3D, contrast enhancement, sharpen, soften, clean image, sub image, select area, rotation, distance, measure, grid and show gradients.
Surveilance
Through Wall Amplifier Kit

The Through Wall Amplifier Kit is supplied as a complete system designed to listen through a wall, or through a door or window, to a target area.
A highly sensitive transducer, complete with mounting accessories, as well as two microphone options, are provided.

Microphone Audio Surveillance System

The Microphone Audio Surveillance System is a multi-channel wired audio system with 10 audio channels and 1 telephone interface channel available. High specification, ultra-miniature microphone/pre-amplifier modules are linked to the main audio amplifier.
The cabling between the microphones and the amplifier can be up to 1 mile in length.
The operator has the option of monitoring instantaneously using headphones or linking into a recording system for retrieval at a later time.
A maximum of eleven recorders in all can be linked to the system. Individual channels may be accessed or, alternatively, any number can be switched on together for simultaneous recording.


GSM Transmitter Module

The Cellular GSM Transmitter Module is a state-of-the-art transmitter designed to operate on the GSM system. The transmitter is designed to monitor conversations taking place in a room, and is activated by someone dialling the GSM telephone number associated with the unit from anywhere in the world.
All conversations in the room can be listened to and, if necessary, recorded.
The SIM card incorporated within the transmitter can be changed just like on a normal mobile phone, allowing a new number to be allocated to the transmitter when required.
An optional external wire-mounted microphone can be used with the transmitter.

Ultra Slim UHF Room Transmitter

The new Ultra-Thin UHF Room Transmitter is the smallest and lightest transmitter in our range.
At 58mm x 29mm and just 5mm thick it can be easily concealed inside a book, wallet, pocket etc, or it can even be be slid under a door.
Unlike most other room transmitters this model has no protruding external antenna, it uses a highly efficient internal loop antenna to keep the overall size to a minimum.
Although small in size, this unit offers excellent sound quality and can pick up a whisper at up to 10 metres away.

Illuminated Telescopic Inspection Mirror

This mirror is probably the most widely used search mirror for people to search under their vehicles for possible car bombs.

Rigid Search Endoscope Kit

The competitively priced Rigid Endoscope Search Kit has been developed for use by specialist Police, Customs and military
operators for a wide range of applications, including narcotics and contraband detection, IEDD and EOD.
The Rigid Endoscope's very high quality optics tube is made of extremely rugged stainless steel.
It has a diameter of 12mm and a working length of 300mm, with a 90΅ lateral direction of view and a 30΅ field of view.
The focus is fully adjustable from 10mm to infinity, and the integral high power fibre optic lighting provides bright and safe 'cold light' illumination, so there is no hot lamp at the end of the Endoscope's tip.

Interscope Search Endoscope

The Interscope is a portable endoscope for searching inaccessible areas of buildings, ships and vehicles.
The robust fixed focus endoscope can be used to inspect cavities and hollow structures internally through holes and gaps of 12mm diameter, with illumination provided by a bright 10 watt lamp protected within the tip.
The endoscope is supplied with a lightweight battery pack, which provides 1.1/2 hours' plus continuous use when fully charged, and a charger power unit.
The Interscope allows the rapid internal inspection of cavities through a hole of only 12mm diameter.
The powerful lamp protected within the tip of the Interscope provides bright illumination for searching dark areas.

Flexible Colour Video Endoscope

The top-quality Flexible Colour Video Endoscope issupplied asa complete, fully portable system specially designed for search professionals to use in areas that are difficult to access, such as inside fuel tanks and behind concealed panels.

Viziscope Fibrescope Kit

The Viziscope is a flexible endoscope designed for covert search and surveillance applications where only a tiny viewing aperture,such as a key hole, under a door,or even a pin hole, may be available.   
Having an image bundle with 30,000 pixels, each of only 8 micron diameter, the Viziscope gives outstanding image resolution and exceptional light response, making it suitable for use in low light conditions. 
An operator simply inserts the 4mm diameter  tip of the 720mm  long flexible endoscope through a suitable aperture. 
The eyepiece has a diopter focus adjustment or, for long-term applications, one can simply  attach it to a CCTV camera via the "C" mount adaptor provided.
The fully flexible Viziscope has a tough polyurethane protective oversheathing.

Under Door Viewer

The latest Under Door Viewer has been designed to obtain live video and audio from within a confined space by means on a 4mm high insertion blade which contains a high resolution camera and highly sensitive microphone incorporated into the tip of the blade.
Comprising the latest optical array, the video image is taken from the very forefront of the blade via a 2.10mm diameter tube to a high resolution monochrome TFT screen.
At the same time the highly sensitive and operationally proven Knowles FG series microphone provides a clear and distinct audio signal of the interior.
This high quality system provides the very best solution to a commander preparing a risk assessment for this dangerous area of operations.

Non-Conductive Flexible Endoscope Kit

This top-of-the-line Non-Conductive Flexible Endoscope is designed for search applications, such as the examination of fuel tanks, where it is essential that the shaft ofthe endoscope is completely non-metallic and non-sparking.
Specifications:

Penetration: 15mm steel
Weight: 5.5kg with battery
Screen: Active matrix 14.21 TFT colour
Processor: Intel dual core, 2.6GHz
Drives: Hard disk 80Gb min CD/DVD writer
Memory: 512Mb RAM expandable
Operating System: Windows XP
Power Source: 220VAC 50Hz or rechargeable battery
Record & Export Facility: Video, audio, data, fax, LAN & Modem
Image Storage: Exceeds 32,000 stored images
Standard Image Area: 8" x 10" (25 x 33mm)
Camera Type: High performance CCD
Resolution: 582 x 752 pixels
Video Signal/Noise: Better than 40dB
FLATSCAN TPXi REAL TIME PORTABLE DIGITAL X-RAY SYSTEM

* EOD examination of suspect packages
* Through wall scanning
* Mobile customs searchers
* Industrial testing
* Minimum time on target
* High penetration capability
* Simple deployment & operation
* Superb image quality

The new FlatScan TPXi is a highly innovative portable x-ray system designed for the real-time examination of suspect threats and the detailed inspection of vehicles.
This system offers the largest imaging area (535mm x 412mm x 50mm) of any portable X-ray system currently available, and the detector panel is also amongst the thinnest at only 50mm.
These, combined with simple reliability, make it ideal for EOD, security and customs applications.
The FlatScan TPXi is a lightweight, yet fully-functional, portable x-ray scanning system which is ideal for suspect threat detection. Investigation of the object can be carried out at a safe distance without the need for wires.
The superb image quality and state-of-the-art processing operations make the decision-making easier, more accurate and quicker.
Robust and simple to operate, the FlatScan TPXi is a world leader in portable x-ray systems.
FLATSCAN TPXi

Technical Specifications

X-Ray Source

* Type: 120kV, 1mA constant potential
* Weight: 6.5kg
* Power: Battery-operated
* Penetration: Over 25mm of steel
                
X-ray Detector

* Detector resolution: 800μm
* Dynamic range: 4096 (12 bit)
* Imaging area: 535 x 412mm
* Scanning orientation: Any direction
* Detector dim: 720x623x50mm
* Weight: 8kg
* Enclosure: Single hand carry

Imaging Station: Notebook

Communications

* Wireless: 802.11g
* Cable: 50m

Power Requirement

* Supply: Self-contained rechargeable cells
* Battery life: Up to 80 images on one charge

Material Differentation:
Dual energy

Environment

* Operating temperature: 0ºC to +40ºC
* Survival temperature: -40ºC to +80ºC
* Relative humidity: 5 - 95% non-condensing

Software Features

* Windows GUI
* Microsoft Windows XP
* Real-time imaging
* Turn-key operation for fast deployment
* STANDARD and DETAIL scanning
  modes for flexible operation
* Data averaging and noise reduction
  algorithms
* Image processing modes include mono
  view, invert view, pseudo colour,
  continuous zoom and pan, image rotate
  and histogram analysis
* Automatic calibration
* Deep Focus - algorithm which enhances
  contrast in dark regions whilst still retaining
  fine-wire contrast with no loss of data
* Simple calibration routines
* Image print and save with image properties
* Battery and network warning functions

Accessories

* FlatScan-TPXi wireless repeater station
* FlatScan-TPXi 50 metre cable set
* FlatScan-TPXi x-ray generator
* Standalone software suite for offline
  processing
* Carrying Case
* Battery charger
BROCHURE